Product Description
heat shrink tube Yellow and Green Striped Heat Shrink Tubing
Model number : SB-RSFR-YG SERIES
Operating temperature:-55ºC~125ºC
STRUCTURE
Yellow/Green heat shrinkable tube is made from excellent yellow, green polyethylene material by special method. There are 2:1 and 3:1 two optional kinds of shrink ratios
USAGE
Usage: Wire and cable conduit marks.
Application range: Electrical, electronic, communications, shipping, aerospace etc.
PRODUCT CHARACTERISTICS
l,Shrink ratio:2:1 & 3:1
2,Shrink temperature: Start at 70ºC, full recovery at 120ºC.
3,Operating temperature:-55ºC~125ºC
4,Soft, flammability, Environmentally, bright color stand and stable performance.
SPECIFICATION
| Property |
Test Method |
Standard |
| Tensile strength (MPa) |
ASTM D2671 |
≥10.4 |
| Elongation (%) |
ASTM D2671 |
≥ 200 |
| Dielectric strength (kv/mm) |
IEC243 |
≥15 |
| Volume resistivity (Ωcm) |
IEC 93 |
≥1x1014 |
| Tensile strength after aging |
UL224 158ºCx168hr |
≥ 7.3 |
| Elongation after aging (%) |
UL224 158ºCx168hr |
≥100 |
| Heat shock |
UL224 250ºCx4hr |
No cracking |
| Flammability |
UL224 |
VW-1 |
DIMENSION
Size
mm |
As supplied (mm) |
After recovery (mm) |
Standard package
M/spool |
Application range (mm) |
| ID |
W.T. |
ID |
W.T. |
| Φ0.8 |
1.0±0.2 |
0.15±0.05 |
≤0.50 |
0.22±0.10 |
200 |
0.6~0.8 |
| Φ1.0 |
1.5±0.3 |
0.15±0.05 |
≤0.65 |
0.28±0.10 |
200 |
0.75~0.9 |
| Φ1.5 |
2.0±0.3 |
0.18±0.05 |
≤0.85 |
0.32±0.10 |
200 |
0.95~1.4 |
| Φ2.0 |
2.5±0.3 |
0.18±0.05 |
≤1.00 |
0.35±0.10 |
200 |
1.1~1.8 |
| Φ2.5 |
3.0±0.3 |
0.18±0.05 |
≤1.25 |
0.38±0.10 |
200 |
1.35~2.3 |
| Φ3.0 |
3.5±0.4 |
0.18±0.05 |
≤1.50 |
0.40±0.10 |
200 |
1.6~2.7 |
| Φ3.5 |
4.0±0.4 |
0.22±0.05 |
≤1.80 |
0.42±0.10 |
200 |
1.85~3.2 |
| Φ4.0 |
4.5±0.4 |
0.25±0.05 |
≤2.00 |
0.45±0.10 |
200 |
2.1~3.6 |
| Φ4.5 |
5.0±0.4 |
0.25±0.05 |
≤2.30 |
0.50±0.10 |
100 |
2.35~4.0 |
| Φ5.0 |
5.5±0.4 |
0.25±0.05 |
≤2.5 |
0.55±0.10 |
100 |
2.6~4.5 |
| Φ6.0 |
6.5±0.4 |
0.28±0.05 |
≤3.0 |
0.55±0.10 |
100 |
3.1~5.4 |
| Φ7.0 |
7.5±0.4 |
0.28±0.05 |
≤3.5 |
0.55±0.10 |
100 |
3.7~6.3 |
| Φ8.0 |
8.5±0.5 |
0.28±0.05 |
≤4.0 |
0.60±0.10 |
100 |
4.2~7.2 |
| Φ9.0 |
9.5±0.5 |
0.30±0.08 |
≤4.5 |
0.60±0.10 |
100 |
4.7~8 |
| Φ10 |
10.5±0.5 |
0.30±0.08 |
≤5.0 |
0.60±0.10 |
100 |
5.2~9 |
| Φ11 |
11.5±0.5 |
0.30±0.08 |
≤5.5 |
0.60±0.10 |
100 |
5.7~10 |
| Φ12 |
12.5±0.5 |
0.30±0.08 |
≤6.0 |
0.60±0.10 |
100 |
6.2~11 |
| Φ13 |
13.5±0.5 |
0.35±0.10 |
≤6.5 |
0.65±0.10 |
100 |
6.7~12 |
| Φ14 |
14.5±0.5 |
0.35±0.10 |
≤7.0 |
0.65±0.10 |
100 |
7.3~13 |
| Φ15 |
15.5±0.6 |
0.40±0.12 |
≤7.5 |
0.70±0.10 |
100 |
7.8~14 |
| Φ16 |
16.5±0.6 |
0.40±0.12 |
≤8.0 |
0.70±0.10 |
100 |
8.3~15 |
| Φ17 |
17.5±0.6 |
0.40±0.12 |
≤8.5 |
0.70±0.10 |
100 |
8.8~16 |
| Φ18 |
19.0±0.7 |
0.40±0.15 |
≤9.0 |
0.80±0.15 |
100 |
9.3~17 |
| Φ20 |
22.0±0.7 |
0.40±0.15 |
≤10.0 |
0.80±0.15 |
100 |
10.4~19 |
| Φ22 |
24.0±0.7 |
0.40±0.15 |
≤11.0 |
0.80±0.15 |
100 |
11.4~21 |
| Φ25 |
26.0±0.7 |
0.55±0.15 |
≤12.5 |
0.90±0.15 |
50 |
12.8~24 |
| Φ28 |
29.0±0.7 |
0.55±0.15 |
≤14.0 |
0.90±0.15 |
50 |
14.4~29 |
| Φ30 |
31.5±0.7 |
0.55±0.15 |
≤15.0 |
0.95±0.15 |
50 |
16~29 |
| Φ35 |
36.5±0.7 |
0.55±0.15 |
≤17.5 |
1.00±0.15 |
50 |
18~34 |
| Φ40 |
41.5±0.7 |
0.55±0.15 |
≤20.0 |
1.00±0.15 |
50 |
21~39 |
| Φ45 |
46.0±0.7 |
0.55±0.15 |
≤22.5 |
1.00±0.15 |
25 |
23~44 |
| Φ50 |
51.0±0.7 |
0.55±0.15 |
≤25.0 |
1.00±0.15 |
25 |
26~49 |
| Φ60 |
≥60 |
0.60±0.15 |
≤30 |
1.55±0.20 |
25 |
35~55 |
| Φ70 |
≥70 |
0.65±0.15 |
≤35 |
1.60±0.20 |
25 |
40~65 |
| Φ80 |
≥80 |
0.70±0.15 |
≤40 |
1.70±0.20 |
25 |
45~75 |
| Φ90 |
≥90 |
0.75±0.15 |
≤45 |
1.90±0.20 |
25 |
50~88 |
| Φ100 |
≥100 |
0.80±0.20 |
≤50 |
2.10±0.20 |
25 |
55~95 |
| φ120.0 |
≥120 |
0.85±0.20 |
≤60 |
2.20±0.20 |
15 |
65~115 |
| φ150.0 |
≥150 |
0.90±0.20 |
≤75 |
2.20±0.20 |
15 |
80~145 |
| φ180.0 |
≥180 |
0.95±0.20 |
≤90 |
2.30±0.20 |
15 |
95~175 |
Specification (3:1)
| Size |
As supplied (mm) |
After recovery (mm) |
Standard package |
| Inch |
mm |
ID |
W.T, |
M/spool |
| 1/8 |
Φ3.2 |
≥3.2 |
≤1.0 |
0.55±0.15 |
200 |
| 3/16 |
Φ4.8 |
≥4.8 |
≤1.5 |
0.60±0.15 |
100 |
| 1/4 |
Φ6.4 |
≥6.4 |
≤2.0 |
0.65±0.15 |
100 |
| 3/8 |
Φ9.5 |
≥9.5 |
≤3.0 |
0.75±0.15 |
50 |
| 1/2 |
Φ12.7 |
≥12.7 |
≤4.0 |
0.75±0.20 |
50 |
| 3/4 |
Φ19.1 |
≥19.1 |
≤6.0 |
0.85±0.20 |
50 |
| 1 |
Φ25.4 |
≥25.4 |
≤8.0 |
1.00±0.20 |
50 |
| 1-1/2 |
Φ39.0 |
≥39.0 |
≤13.0 |
1.50±0.20 |
50 |
COLOR:
Standard color is yellow and green
Detailed Photos
Company show
FAQ
1. Why choose us?
We are the No.1 fiberglass sleeve coated silicone resin in China.
2. What material do you use?
Fiberglass yarn and silicone resin,PVC,silicone,PE,PET. RoHS,Reach,UL certificated
3. How's the package?
Packed by roll then rolls by carton. Also can cut and pack as requested.
4. Where is your factory?
In Shenzhen. The loading port here is Yantian or Shekou.
5. How many employees are there in your company?
More than 50.
6. How many people are there in your R&D department?
More than 5 desingers,.
7. How do you control the quality?
We have 8 QC team.
Each process has one QC. We check carefully before shipment.
8. What's your sample lead time?
can ship right now if in stock.5 - 7 working days if the items are out of stock.
9.Is the sample free charge?
Yes,it is free but the express fee should be paid by buyer.
10.What's your mass production lead time?
7 - 15 working days.
11. What's your payment terms?
L/C at sight, T/T in advance,Western Union,Paypal.
){kind=link}