Heat Resistant High Temperature Glass Fiber Insulation VW-1 UL Fiberglass Braided Silicone Sleeve

• Customization: Available
• Application: Electrical Winding Insulation, Motor, Wire Harness, Transformer
• Color: All Colors
• Maximum Voltage: <10KV
• Thermal Rating: 200 200
• Materials: Fiberglass and Silicone Resin
• Breakdown Voltage: 2.5kv
• Standard Color: Black
• UL No.: E333178
• Type: Insulation Sleeve & Tube
• Chemistry: Inorganic Insulation
• Certification: ISO9001, Ts16949
• Brand: Sunbow
• Transport Package: Carton Package or Pallet Package
• Specification: ID: 0.5~45mm
• Trademark: Sunbow
• Origin: Shenzhen, China
• HS Code: 7019190999
• Production Capacity: 100000000

Product Description

Heat Resistant High Temperature Glass Fiber Insulation vw-1 UL Fiberglass Braided Silicone Sleeve
Product Details

Working temperature:200°C

Structure
The material content of the SB-SGS-25 is Non-alkali Fiberglass Braided then coated with silicone resin and treated in high temperature.
 

Product Introduction

Usage

SB-SGS-25 sleeving with its good dielectric strength, flexibility and flame retarding properties make it high performance qualities. It can be widely used in insulated or partially insulated conductors, bus bars, component leads.

Package: Packing by rolls or cut upon request.
Color: Standard color is white, other color available upon request.

Sunbow fiberglass tear resistance is two times than others, famous sensor manufactuer choose Sunbow

Recently, we have received good news. The 2.5KV fiberglass casing provided by SUNBOW has been tested by TKD Japan headquarters, and many indicators have reached the standard. Among them, the tear resistance is twice that of the peers, which means that there is another TKD sensor. The glass tube produced by SUNBOW is out.

At present, there are no more than 1,000 domestic manufacturers of fiberglass pipes, but most of them are of uneven quality, and the prices are not the lowest, but lower. Most of the factories do not have their own unique formulas, and there is no systematic quality control system, so There is no difference in the products made. The reason is that most of the factories are still in the stage of small workshops, and our SUNBOW factory is a factory that has passed the ISO9001 and IATF16949 quality management system and has unconditionally performed product quality management in accordance with the system requirements. This determines the leading position of SUNBOW in the fiberglass tube industry.

TD is a Japanese company with a leading position in electronic raw materials and components. In May of this year, I received an email from the TD headquarters in Japan. The customer has an electronic sensor for Honda cars that needs to use glass fiber tube, with a withstand voltage of 2.5KV, and a very high accuracy. The requirements for inner diameter and outer diameter are very high, and the CPK index reaches 1.67, and the requirement for the tear resistance of the glass fiber tube is very high.

After evaluation by the technical department, we are very confident in this project. At the end of May, we started to make samples according to the customer's requirements. At the beginning of June, we sent samples. During the two months, we asked the customer about the situation. The customer only said that it was still testing and needed to wait. No. Yesterday I received good news from the customer. The customer said that our glass fiber tube can not only reach their CPK index of 1.67, but also has very good tear resistance, which is 2 times higher than the tear resistance of the suppliers they have contacted before. Much.

For the same glass fiber tube, why is SUNBOW's tear resistance twice as much as that of its peers?

1. SUNBOW insists on purchasing the domestic big-name alkali-free waxy glass fiber yarn. Its toughness is twice higher than that of other small brands. Of course, the price is 50% higher than the small brands selected by most of our peers.

2. SUNBOW uses Wacker silica gel raw materials imported from Germany, and its temperature resistance, electrical insulation performance and plasticity are two times higher than domestic silica gel raw materials.

3. SUNBOW is not only better than its peers in the selection of raw materials, but more importantly, SUNBOW has its own unique processing technology, such as a very mature weaving process and a unique coating process with independent formulas. Most of our peers have Similarly, there is no big difference in the products made.

4. SUNBOW implements 100% of the ISO9001 and IATF16949 quality management system to each process. At the same time, SUNBOW's workers have very high quality awareness. Most of our peers have not implemented a quality management system.

The tear resistance of SUNBOW's fiberglass tube is twice that of its peers. The well-known Japanese sensor manufacturer has selected another SUNBOW fiberglass tube. The quality of SUNBOW's fiberglass tube is trustworthy! !

Product Parameters

Inside diameter		Wall thickness (mm)	Standard package         m/roll
Nominal (mm)	Tolerance (mm)
φ0.5	+0.2, -0.1	≥0.30	200
φ1.0	+0.2, -0.1	≥0.30	200
φ1.5	+0.2, -0.1	≥0.30	200
φ2.0	+0.2, -0.1	≥0.30	200
φ2.5	+0.3, -0.1	≥0.35	200
φ3.0	+0.3, -0.1	≥0.35	200
φ4.0	+0.3, -0.1	≥0.35	200
φ4.5	+0.3, -0.1	≥0.40	100
φ5.0	+0.3, -0.1	≥0.40	100
φ6.0	+0.3, -0.1	≥0.40	100
φ7.0	+0.3, -0.1	≥0.45	100
φ8.0	+0.3, -0.1	≥0.45	100
φ9.0	+0.3, -0.1	≥0.55	100
φ10.0	+0.3, -0.1	≥0.55	100
φ12.0	+1.0, -1.0	≥0.55	50
φ14.0	+1.0, -1.0	≥0.55	50
φ16.0	+1.0, -1.0	≥0.55	50
φ18.0	+1.0, -1.0	≥0.55	50
φ20.0	+1.0, -1.0	≥0.65	25
φ25.0	+1.0, -1.0	≥0.65	25
φ30.0	+1.0, -1.0	≥0.65	25

Product Details Show
Wire Insulation Silicone Varnished Fiberglass Sleeve